工程专业知识SwissOptic

System Measurement. For Prototypes and Production.

Our measurement technique expertise and our comprehensive equipment ensure that our optical components, assemblies and systems meet your requirements. For individual requests, we develop complete measurement setups with corresponding software in order to evaluate customer-specific parameters.

We measure what we manufacture. Our measurement techniques include:

Wave­front Measure­ment

We employ highly precise interferometers (up to λ/100 WF PV) to measure wavefront deformations in reflection and transmission. Our many years of experience in measurement techniques also allow us to perfectly adapt existing measurement equipment to product requirements. This means that we can take measurements, for example, at the respective position of installation, under cleanroom conditions and in climatic chambers. Intermediate testing during production is ensured through the use of numerous factory interferometers:

  • Phase-shifting Fizeau-Interferometers
  • Interferometers with short coherence length for multiple-layered glass
  • Interferometers with CGH wavefront formation for aspheres
  • Axial-stitching interferometers for rotationally symmetric aspheres
  • Infrared interferometers, 3.4 µm
  • Shack-Hartmann wavefront sensors for wavelengths of 350 to 1,064 nm and beam diameters up to 15 mm
  • Fizeau-Interferometers on an optic bank to measure large spheres using stitching
原型打样的测量

Wide range of optic measurement devices

Dimen­sional, Shape and Layer Measure­ments

We have numerous 3D measurement devices:

Tactile 3D measuring machines  
DEA Global DMP 7-10-7    (x-y-z: 700 mm/1000 mm/700 mm)
Measurement inaccuracy 1.5 + L/333
Brown & Sharpe PFX 4-5-4    (x-y-z: 400 mm/500 mm/400 mm)
Measurement inaccuracy 3.0 + 4.5xL/1000

 

Angle Measure­ment of Optical Compo­nents

To measure planar and wedge plates, prisms and polygons, we use goniometers with angular resolutions of 1 arc second.

Micro­roughness

To measure microroughness, we employ several white light interferometers with different features. In addition to microroughness, we are able to measure step heights with these instruments.

  • Vertical resolution up to ca. 0.1 nm (for Ra < 10 nm)
  • Lateral resolution up to 0.64 µm, NA to 0.55
  • Field of view up to (7.07 x 5.30) mm

Spectral Reflection and Trans­mission Measure­ment

We employ spectrophotometers from various manufacturers:

  • Lambda 900 and Lambda 1050 as well as Carry 7000 UMS
  • Spectral range: 200-2,500 nm
Transmission Surface planar
T = 0…100 %
AOI: 0…85° for t < 1 mm
Reflection Surface planar
R = 0…100 %
AOI: 10…85° (large AOI = large substrate)

Imaging Perform­ance

Modulation Transfer Function (MTF)

A large MTF system with a maximum aperture of 200 mm is available to measure imaging quality. In addition to MTF measurement, additional characteristics like distortion, field of curvature and focal width for field angles > 90° can be measured. Object and image positions are finitely and infinitely adjustable in wide areas.

MTF-Messplatz

MTF measuring station

Contact our specialists

Please choose your contact partner:

Kontakt-Avatar
刘华南 (Steve Liu)
国际业务联系人
电话 +86 27 8792 8576
Kontakt-Avatar
陈瑞 (Tommy Chen)
国内业务联系人
电话 +86 27 59311585